Omnidots Swarm V2 Sensor

  • Swarm V2傳感器,Omnidots的新型振動監測方法!
  • Swarm測量的振動根據DIN4150,DIN4150-3 80Hz,BS7385 250 Hz和SBR指南進行測試。 在測量和評估由振動引起的損壞和不便時,這些指南可用於指導。
  • Swarm是一種基於MEMS的傳感器,頻率範圍為0.5 – 100 Hz,分辨率為0.01 mm / s,具有FFT主頻確定功能。
  • 它有一個10米精度的內置GPS接收器。
  • 記錄間隔時間可以設置為2-6000秒,觸發水平在0.2和50 mm / s之間。
  • 可預設2個警報級別,通過電子郵件,短信和個人儀表板進行通知。
  • Swarm傳感器是自主的,內置電池,工作時間在50-500小時之間,具體取決於數據傳輸(wifi / 3G)。
  • 它的防護等級高達IP65,可在-10到70攝氏度的溫度下工作。

 

  • Swarm V2 sensor, the new vibration monitoring approach from Omnidots!
  • Vibrations measured by the Swarm are tested against the DIN4150, DIN4150-3 80Hz, BS7385 250 Hz and SBR guidelines. These guidelines are available for guidance when measuring and assessing damages and inconvenience caused by vibrations.
  • Swarm is a MEMS-based sensor with a frequency range of 0.5 – 100 Hz with a resolution or 0.01 mm/s with FFT dominant frequency determination.
  • It has a built-in GPS receiver with 10-meter accuracy.
  • The logging interval time can be set from 2 – 6000 seconds, possibley with a trigger level between 0.2 and 50 mm/s.
  • 2 alarm levels can be preset, notification by Email, SMS and personal dashboard.
  • The Swarm sensor is autonomous with a build in battery with operating time between 50 – 500 hours, depending on the data transfer (wifi / 3G).
  • It’s well protected up to IP65 and works in temperatures from -10 up to 70 degrees Celsius.